You must have DD-WRT installed on an MR7350,MR7340,MR7320,MR7310 preferably the 05-24-2026-r65140 revision Or higher installed prior to using this configuration file.

Available here https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2026/05-24-2026-r65140/linksys-mr7350/ 

***Must Do*** 
Disconnect the Ethernet cable from the Internet port prior to using this file. 
Failure to do so will result in the router being accessible (disconnecting the Ethernet cable from the Internet port and rebooting the router will fix it).

Connect directly from your computer using an Ethernet cable to port#1, the port closest to the antenna usually labeled on the router (only important to these configuration files but again a must do for these files as otherwise you may not be able to access the router).

Reset the router to factory defaults prior to using this file. 

Be patient with the configuration it takes a full minute and half to complete. 

Log In 
User Name is: admin
Password is: RichardLloydUSA

Password for everything requiring a password is:  RichardLloydUSA

Watch the full video here: https://youtu.be/iYHGuCwAJ_w

See the full network diagram for this configuration here: https://richardlloydusa.com/%231-mr7350-dd-wrt-install

Please make sure you change all WIFI and Log In passwords. 

Set the Time Zone Basic>Basic Setup Tab near the bottom to your Time Zone

For educational purposes only.

Thanks and Enjoy!
